CQ series magnetic drive pump

　　CQ series magnetic drive pump produces CQ stainless steel magnetic pump and CQF engineering plastic magnetic pump according to the material Shanghai Xiangyang, and CQB-F fluoroplastic alloy magnetic pump with strong corrosion resistance. Below we highlight the following CQ stainless steel drive pumps:

　　The principle of CQ series stainless steel magnetic drive pump can be as its name suggests. As long as it is a magnetic drive pump, the external magnetic steel is driven by the motor. The strength of the magnetic field is used to drive the inner magnetic steel to rotate, and the inner magnetic steel drives the impeller to transport the medium. The over-flow part of this product in Fuyang uses imported stainless steel (304, 316, 316L), high-density carbon, high-purity alumina ceramics and other imported materials. Therefore, it has its perfect characteristics: no mechanical seal, to prevent leakage of liquid; it is the best choice for transporting volatile liquids such as acid night, lye, venom and photographic liquid.

　　CQ series stainless steel magnetic drive pump should pay attention to the problem:

　　1. It is forbidden to idling, thinking that the bearings of the magnetic drive pump are lubricated and cooled by the pumped medium. Therefore, once idling, the entire pump will be seriously damaged due to damage of the bearing.

　　2. The magnetic drive pump requires no solid particles, especially magnetic particles. Otherwise, the magnetic field of the magnetic pump will be destroyed, causing the internal and external magnetic steels to lose balance and burn.

　　3. The temperature of the liquid to be transported should be observed in time. In theory, the working temperature of the magnetic drive pump is not more than 100 degrees Celsius, depending on the acidity and alkalinity and concentration of the pumped medium.

　　4. The magnetic drive pump should be inspected once after 500 hours of operation. Mainly due to the wear of the bearing and the moving ring, it is recommended to replace the bearing and the moving ring during maintenance to ensure the normal operation of the pump.